Easy connection to the vehicle

The condition of the high-voltage battery in electric and hybrid cars determines their value as it is one of the most expensive parts of their construction. The concern that reasonably arises is whether there is a way to perform a reliable check on the vehicle's high-voltage battery.

Autocom with its specialized AVILOO equipment can help. Simply connect the device to the vehicle and the process of a comprehensive check will begin and be completed in approximately three minutes. The results are presented in a detailed report which can be printed and delivered to your customer or fleet manager.

In case a more detailed check is desired, with greater analysis of the high voltage battery operation, this is also possible, however the process requires analysis during a trip and therefore takes longer to complete.

Increase your services provided

- Get the answers you seek
- Earn customer trust
- Correct vehicle value assessment
- Simple check-in process
- Get an analytical report
- Issuance of a TÜV-certified battery certificate
- CARA certification (www.cara-europe.org)

Choose between two control options FLASH or PREMIUM. Real-time information and battery status assessment are available for both. Check battery status, State of Charge (SoC), State of Health (SoH) and much more.

​

FLASH Test

Checking and identifying possible defects and determining the level of functionality.

• Battery analysis process takes about 3 minutes

• Battery check with vehicle parked

• Receive an audit report

Procedure details

1. Connecting a device to the vehicle

2. Switch open

The battery check starts and the light (LED) on the device flashes yellow.
The process is completed in approximately three minutes and once the light (LED) on the device remains solid green.

A report with the results is sent by e-mail.

PREMIUM Test

Extended analysis control. Accurate battery condition determination and TÜV certificate issuance
battery certificate.

• Check for possible battery defects

• Battery analysis while driving

• Independent measurement of service level (SoH)

Procedure details

1. Connect the device to the vehicle

2. Make sure the battery is 100% charged

3. Follow the steps you have taken

4. Drive the vehicle until the charge level reaches 10% from 100% since the start of the test cycle, under normal driving conditions. The above procedure must be completed within a maximum of seven days.

A few days after the end of the process, you will receive a battery status certificate by e-mail.